Deployment of the Bootstrap node


  1. Build the ISO using this procedure. Scality customers can retrieve validated builds as part of their license from the Scality repositories.

  2. Download the MetalK8s ISO file on the machine that will host the bootstrap node. Mount this ISO file at the specific following path:

    root@bootstrap $ mkdir -p /srv/scality/metalk8s-2.4.5-dev
    root@bootstrap $ mount <path-to-iso> /srv/scality/metalk8s-2.4.5-dev


  1. Create the MetalK8s configuration directory.

    root@bootstrap $ mkdir /etc/metalk8s
  2. Create the /etc/metalk8s/bootstrap.yaml file. This file contains initial configuration settings which are mandatory for setting up a MetalK8s Bootstrap node. Change the networks, IP address, and hostname fields to conform to your infrastructure.

    kind: BootstrapConfiguration
      controlPlane: <CIDR-notation>
      workloadPlane: <CIDR-notation>
      pods: <CIDR-notation>
      services: <CIDR-notation>
      http: <http://proxy-ip:proxy-port>
      https: <https://proxy-ip:proxy-port>
        - <host>
        - <ip/cidr>
      minion: <hostname-of-the-bootstrap-node>
      - <path-to-metalk8s-iso>

The networks field specifies a range of IP addresses written in CIDR notation for it’s various subfields.

The controlPlane and workloadPlane entries are mandatory. These values specify the range of IP addresses that will be used at the host level for each member of the cluster.


All nodes within the cluster must connect to both the control plane and workload plane networks. If the same network range is chosen for both the control plane and workload plane networks then the same interface may be used.

The pods and services fields are not mandatory, though can be changed to match the constraints of existing networking infrastructure (for example, if all or part of these default subnets is already routed). During installation, by default pods and services are set to the following values below if omitted.

For production clusters, we advise users to anticipate future expansions and use sufficiently large networks for pods and services.


The proxies field can be omitted if there is no proxy to configure. The 2 entries http and https are used to configure the containerd daemon proxy to fetch extra container images from outstide the MetalK8s cluster. The no_proxy entry specifies IPs that should be excluded from proxying, it must be a list of hosts, IP addresses or IP ranges in CIDR format. For example;

  - localhost

The archives field is a list of absolute paths to MetalK8s ISO files. When the bootstrap script is executed, those ISOs are automatically mounted and the system is configured to re-mount them automatically after a reboot.

SSH Provisioning

  1. Prepare the MetalK8s PKI directory.

    root@bootstrap $ mkdir -p /etc/metalk8s/pki
  2. Generate a passwordless SSH key that will be used for authentication to future new nodes.

    root@bootstrap $ ssh-keygen -t rsa -b 4096 -N '' -f /etc/metalk8s/pki/salt-bootstrap


    Although the key name is not critical (will be re-used afterwards, so make sure to replace occurences of salt-bootstrap where relevant), this key must exist in the /etc/metalk8s/pki directory.

  3. Accept the new identity on future new nodes (run from your host).

    1. Retrieve the public key from the Bootstrap node.

      user@host $ scp root@bootstrap:/etc/metalk8s/pki/ /tmp/
    2. Authorize this public key on each new node (this command assumes a functional SSH access from your host to the target node). Repeat until all nodes accept SSH connections from the Bootstrap node.

      user@host $ ssh-copy-id -i /tmp/ root@<node_hostname>


Run the Installation

Run the bootstrap script to install binaries and services required on the Bootstrap node.

root@bootstrap $ /srv/scality/metalk8s-2.4.5-dev/


For virtual networks (or any network which enforces source and destination fields of IP packets to correspond to the MAC address(es)), IP-in-IP needs to be enabled.

Validate the install

  • Check that all Pods on the Bootstrap node are in the Running state. Note that Prometheus and Alertmanager pods will remain in a Pending state until their respective persistent storage volumes are provisioned.


The administrator kubeconfig file is used to configure access to Kubernetes when used with kubectl as shown below. This file contains sensitive information and should be kept securely.

On all subsequent kubectl commands, you may omit the --kubeconfig argument if you have exported the KUBECONFIG environment variable set to the path of the administrator kubeconfig file for the cluster.

By default, this path is /etc/kubernetes/admin.conf.

root@bootstrap $ export KUBECONFIG=/etc/kubernetes/admin.conf
root@bootstrap $ kubectl get nodes --kubeconfig /etc/kubernetes/admin.conf
NAME                   STATUS    ROLES                         AGE       VERSION
bootstrap              Ready     bootstrap,etcd,infra,master   17m       v1.15.5

root@bootstrap $ kubectl get pods --all-namespaces -o wide --kubeconfig /etc/kubernetes/admin.conf
NAMESPACE             NAME                                                      READY   STATUS    RESTARTS   AGE     IP               NODE            NOMINATED NODE   READINESS GATES
kube-system           calico-kube-controllers-7c9944c5f4-h9bsc                  1/1     Running   0          6m29s   bootstrap   <none>           <none>
kube-system           calico-node-v4qhb                                         1/1     Running   0          6m29s     bootstrap   <none>           <none>
kube-system           coredns-ff46db798-k54z9                                   1/1     Running   0          6m29s   bootstrap   <none>           <none>
kube-system           coredns-ff46db798-nvmjl                                   1/1     Running   0          6m29s   bootstrap   <none>           <none>
kube-system           etcd-bootstrap                                            1/1     Running   0          5m45s     bootstrap   <none>           <none>
kube-system           kube-apiserver-bootstrap                                  1/1     Running   0          5m57s     bootstrap   <none>           <none>
kube-system           kube-controller-manager-bootstrap                         1/1     Running   0          7m4s     bootstrap   <none>           <none>
kube-system           kube-proxy-n6zgk                                          1/1     Running   0          6m32s     bootstrap   <none>           <none>
kube-system           kube-scheduler-bootstrap                                  1/1     Running   0          7m4s     bootstrap   <none>           <none>
kube-system           repositories-bootstrap                                    1/1     Running   0          6m20s     bootstrap   <none>           <none>
kube-system           salt-master-bootstrap                                     2/2     Running   0          6m10s     bootstrap   <none>           <none>
kube-system           storage-operator-7567748b6d-hp7gq                         1/1     Running   0          6m6s   bootstrap   <none>           <none>
metalk8s-ingress      nginx-ingress-control-plane-controller-5nkkx              1/1     Running   0          6m6s   bootstrap   <none>           <none>
metalk8s-ingress      nginx-ingress-controller-shg7x                            1/1     Running   0          6m7s   bootstrap   <none>           <none>
metalk8s-ingress      nginx-ingress-default-backend-7d8898655c-jj7l6            1/1     Running   0          6m7s   bootstrap   <none>           <none>
metalk8s-monitoring   alertmanager-prometheus-operator-alertmanager-0           0/2     Pending   0          6m1s    <none>           <none>      <none>           <none>
metalk8s-monitoring   prometheus-operator-grafana-775fbb5b-sgngh                2/2     Running   0          6m17s   bootstrap   <none>           <none>
metalk8s-monitoring   prometheus-operator-kube-state-metrics-7587b4897c-tt79q   1/1     Running   0          6m17s   bootstrap   <none>           <none>
metalk8s-monitoring   prometheus-operator-operator-7446d89644-zqdlj             1/1     Running   0          6m17s   bootstrap   <none>           <none>
metalk8s-monitoring   prometheus-operator-prometheus-node-exporter-rb969        1/1     Running   0          6m17s     bootstrap   <none>           <none>
metalk8s-monitoring   prometheus-prometheus-operator-prometheus-0               0/3     Pending   0          5m50s   <none>           <none>      <none>           <none>
metalk8s-ui           metalk8s-ui-6f74ff4bc-fgk86                               1/1     Running   0          6m4s   bootstrap   <none>           <none>
  • From the console output above, Prometheus and Alertmanager pods are in a Pending state because their respective persistent storage volumes need to be provisioned. To provision these persistent storage volumes, follow this procedure.

  • Check that you can access the MetalK8s GUI after the installation is completed by following this procedure.

  • At this stage, the MetalK8s GUI should be up and ready for you to explore.


    Monitoring through the MetalK8s GUI will not be available until persistent storage volumes for both Prometheus and Alertmanager have been successfully provisioned.

  • If you encouter an error during installation or have difficulties validating a fresh MetalK8s installation, visit our Troubleshooting guide.